MAT Trailer Hub And Drum, 3500 lb Axle, 5 on 4-3/4″, Cupped And Studded

This MAT trailer hub and drum is designed to mount on a 3,500 lb idler axle with a #84 spindle. The bolt pattern is 5 on 4-3/4″.  Trailer hub and drums gives a gripping surface for the brake shoes when you apply the brakes. They are compatible with both electric or hydraulic 2-1/4″ brake assemblies. Comes with the races and studs properly pressed in and ready for assembly. Choose between the Regular or EZ Lube grease cap to match your application. Durable steel construction offers a 1,750 lb. hub capacity. *Bearings, seal, dust cap, lug nuts, cotter pin, spindle washer, and spindle nut are sold separately.* **Be sure and know your bolt pattern before your purchase.** The center stud to center stud measurement can help you determine your bolt pattern or refer to the chart on the left. Bolt pattern measurements are as follows. 2-5/8″ is 4-1/2″ bolt pattern, 2-3/4″ is 4-3/4″ bolt pattern, 3″ is 5″ bolt pattern, and 3-1/4″ is 5-1/2″ bolt pattern. *Please verify your bearing numbers before placing your order.* Compatible With Dexter 008-247-12, Dexter K08-247-93, Dexter K08-247-12 Compatible with Dexter, AL-KO, Lippert, Rockwell, and Besser Pro trailer axles. Specifications: Increase the life of your trailer, by using Miller Auto Technology’s top of the line, durable, quality replacement parts. Hub & Drum Only Axle Capacity: 3,500 lbs. Hub Capacity: 1,750 lbs. Bolt Pattern: 5 On 4-3/4″ Drum Dimensions: Diameter: 10″ / Width: 2-1/4″ Bearings: Inner Bearing: L68149 (ID- 1.378″) / Outer Bearing: L44649 (ID- 1.063″) Sold Separately Races: Inner Race: L68111 / Outer Race: L44610 Grease Seal: #84  (ID: 1.719″ / OD: 2.565″) Sold Separately Grease Cap: Regular Or EZ Lube Sold Separately 1/2″ Studs MAT 99-5475-CS Commonly used on Utility Trailers, Flatbed Trailers, Equipment Trailers, Snow Mobile Trailers, Car Hauler Trailers, Camper Trailers, Cattle Trailers, & Horse Trailers